Utilization of Static Electricity Requirements Isolated Electric Wire (100 meters or more) Nylon Rope (5 meters) 1 Sparking Plug 1 Ignition Coil 1 Condenser of about 10 pF and at least 1500v (4 Condensers in series of 40 pF and 400v each can also be used) 1 Silicone Diode of 300 volts 12 Volts Ni-Cd Rechargeable Battery Instructions Start by suspending a long isolated electric wire, a few meters above the ground (the higher the better) and without touching any conducting material. The wire extremities must be isolated from the ground as well as tied with nylon at the ends (To avoid the wire from touching anything- except the nylon wire which is a poor conductor). The length of the wire determines the accumulation rate of the electricity, while the higher the wire is place up, the more the system will be effective. The wire must remain stiff at all times as to prevent from being pulled so as to share the force of the traction. Alternative Setup To cover m...
Today’s society, people are more or less the same. We have been told how the world works, how basic laws of physics and other work. According to my blogger website we read, we know everything there is to know about every possible physics law. You will not find any blogger web at any Search engines like Google that tells you what the truth is. In reality, we discovered only a very small percentage of physics laws, and everything that we did discovered is not fool proof either.